Schmersal Safety Switches

Product Details:

To meet the growing demand of our customers, our company is providing supreme range of Pull Cord Switch to our clients. This product is extensively used as a safety switch to stop the conveyor belt in case of an emergency and other related flaw. Our product is made with fine quality of material and passes several different safety protocols to give excellent working in future.

 

Features:

• Easy to use
• Water and fire resistance
• Easy to use
• Release push button
• Position indicator
• Robust design
• Large wiring compartment
• Twisting of towing eye not possible
• External watertight collar
• wire pull and breakage detection
• 3 cable entries M 20 x 1.5

Product Details:

Schmersal Hinge Safety Switch: Owing to the vast industrial experience and expertise in this domain, we are providing Hinge Safety Switch to our clients. Our product is made with fine quality of material and widely accepted as a safety measure. Its unique magnetizes sensor give total security to the consumer.

 

Features:

• Simple user interface
• Low maintenance required
• Easy to operate
• Good resistance to oil and petroleum spirit
• For left or right hinged doors
• Simple mounting, suitable for all conventional profile systems (30 - 60 mm)
• 1 cable entries M 16 x 1.5 with fixed switching angle

Product Details:

We are offering PS116-Z11-ST-H200 Schmersal Position Switch to our clients.

Features:

• Thermoplastic enclosure
• Symmetric enclosure
• Lever angle adjustable in 15° steps
• Actuator heads can be repositioned by 8 x 45°
• Connector plug M12, bottom
• Snap action 1 Normally open contact (NO) / 1 Opener (NC)

Product Details:

We are offering  Belt Alignment Switch to our clients.
Other details:

• Metal enclosure
• Suitable for heavy duty
• 2 cable entries M20
• Continuous adjustment of lever position 360 deg

Product Details:

We are offering Schmersal Two Hand Switches to our clients.

Product Details:

We are offering Schmersal Safety Relay to our clients.

Other Details:

• Suitable for signal processing of potential-free outputs, e.g. emergency stop command devices, position switches and solenoid interlocks
• Suitable for signal processing of outputs connected to potentials (AOPDs), e.g. safety light grids/curtains
• 3 safety contacts, STOP 0, 2 safety contacts, STOP 1 (adjustable 1-30 s)
• 4 Signalling outputs
• Optional: Short-circuit recognition, Manual reset with edge detection in fail-safe circuit, Automatic reset function

Product Details:

We are offering Safety Light Curtain to our clients.

Product Details:

Schmersal Limit Switches: We hold expertise in offering supreme quality range of Limit Switch to our clients. This product is made with top grade of raw material and designed to work as a safety element at various places. Our products are highly appreciated for excellent and flawless working for a much longer life.

 

Features:

• Longer working life
• Industry Leading Prices
• Fine quality

Product Details:

Solenoid operated Door Swicthes, the solenoid inside swicth will get latched and keep it locked till the voltage to the coil is stopped., Widely Used in textile machines, turning centres and most of shop floor machineries.

Destination and Use:

• The solenoid interlock AZM 161 has been designed to prevent
• movable safety guards in conjunction with the control part of a
• machine from being opened before hazardous conditions have been
• eliminated.
• The solenoid interlock must not be used as end stop.
• It can be mounted in any desired position. Though it should be
• mounted in such a way that dirt cannot enter the actuator opening.
• The remaining actuator openings must be sealed with the provided
• slot covers.

• The solenoid interlock has a set latching of 30 N.

Mounting / Wiring:

• There are three boreholes (Ø 5.5 mm) for mounting the solenoid interlock. The boreholes a and b must be used.
• If required the the cable entries can be opened by screwing in Pg 11 cable glands with suitable IP rating.
• The solenoid interlock has protecive insulation. A connection of a protective lead is not allowed.
• As a mounting aid and in case of power failure, a manual unlocking device is provided. By turning the triangle located on the side of the switch, clockwise 180°, the latching bolt is put into unlocked position.
• When unlocking, caution should be taken so that there is no damage to the unlocking device due to jamming of the actuator caused by outside influences. The normal solenoid locking function will only occur, if the triangle is returned to its original position. The manual unlocking device has to be secured by repositioning the enclosed plastic cap.

Wiring and Sealing:

• Appropriate cable glands with a suitable degree of protection are to be used. Any unused entries should be closed using a trreaded blanking plug. Before wiring check the setting of the switching points with a multimeter.

Maintenance: With careful mounting as described above, the switch requires little maintenance. By use in extreme conditions, we recommend routine maintenance als follows:

• Check cable entries and terminal connections
• Remove all debries or particles

Product Details:

Schmersal Solenoid Interlock Door Switch: Banking on the skills of our qualified teams of professionals, our company is offering Solenoid Switch to our valuable clients. This product is designed to give support in flow of electromagnetic charges in different safety instruments and other related applications. Looking towards the demand of our clients we are providing this product range in bulk.

 

Features :

• Easy handling
• Compact size
• Precisely designed
• Long life
• Double-insulated
• Interlock with protection against incorrect locking.
• Large wiring compartment
• Manual release
• Cable entries 4 M 16 x 1.5

Product Details:

We have carved a niche amongst the most dominant name in this domain, involved in providing Schmersal Electric Foot Switch. This product is widely used in different small scale industries to make operation of machinery by foot. Its unique foot switch design gives steady functioning of machinery. Our products are highly appreciated for its quality structure and flawless working.

Features:

• Shock resistance
• Precision-designed
• Simple installation
• 1 Cable entry M 20 x 1.5
• Protective shield with wide opening
• Low operating height of pedal
• High level of stability

Product Details:

We are offering Schmersal Safety Edges to our clients.

Other Details:

• Control category optionally 1, 3 or 4 in combination with the SE-100C, SE-304C or SE-400C safety-monitoring module
• Modulated infra-red signal
• Interference-proof against external light
• Regulated transmitter, i.e. automatic adaptation for distance to receiver
• Constant sensitivity independently of the length of the safety edge
• Lengths from 0.4 m to 8 m possible
• Dirt and moisture in the profile are to a great extent compensated
• Transmitter/receiver potted, protection class of the signal transmitter IP67
• Insensitive to environmental conditions
• Max. distance sensors / evaluation 200 m

Product Details:

We are offering Schmersal Non Contact Door Switches to our clients.

Features:

• Thermoplastic enclosure
• Small body
• Concealed mounting possible
• Long life
• No mechanical wear
• Insensitive to transverse misalignment
• Insensitive to soiling
• Connector M8 x 1, 4-pole