PLC Programmable Logic Controller

Product Details:

The Allen-Bradley® MicroLogix™ 1400 from Rockwell Automation complements the existing MicroLogix family of small programmable logic controllers. MicroLogix 1400 combines the features you demand from MicroLogix 1100, such as EtherNet/IP, online editing, and a built-in LCD, plus provides you with enhanced features, such as: higher I/O count, faster High Speed Counter/PTO and enhanced network capabilities Take advantage of the built-in LCD with back lighting to set the Ethernet network confi guration, display fl oating point values on a user confi gurable display, display OEM logos at startup and read or write any binary, integer and long fi le elements in the data table. Three embedded communication ports provide you with excellent communications capabilities. MicroLogix 1400 off ers an isolated RS232C/ RS485 combination port; a non-isolated RS232C port; and an RJ-45 port for 10/100 Mbps EtherNet/IP peer-to-peer messaging, DNP3 over IP and Modbus TCP/IP protocol. Similar to the rest of the MicroLogix family, MicroLogix 1400 is programmed with RSLogix 500 programming software (Version 8.1 and above) as well as RSLogix Micro programming software. 

Features and Benefits:

• Expand your application capabilities with up to 7 expansion I/O modules for a maximum of 256 discrete I/O 
• Up to 6 embedded 100 kHz highspeed counters (on controllers with dc inputs)
• 2 Serial ports with DF1/ DH485/ Modbus RTU/DNP3/ASCII protocol support 
• Ethernet port provides you with EtherNet/IP, DNP3 over IP and Modbus TCP/IP protocol support as well as web server and email capabilities 
• Built-in LCD with backlight allows you to view controller and I/O status, and provides a simple interface for messages, bit / integer monitoring and manipulation.

Product Details:

MITSUBISHI PLC FX1N series base units are available with 14 to 60 input/output points. It is possible to choose between relay and transistor output type.

Special Features of MITSUBISHI PLC FX1N series:

• Integrated serial interface for communication between Personal computers and HMI
• Standard programming unit interface
• LEDs for indicating the input and output status
• Detachable terminal blocks for units with 14, 24, 40, and 60 I/Os
• Slot for memory cassettes
• All DC models with variable voltage from 12 up to 24 V
• Integrated real-time clock
• Exchangeable interface and I/O adapter boards for direct fitting into the base unit.

Base Units with 14 - 24 I/Os:

Product Details:

MITSUBISHI PLC FX2N series base units are available with 16, 32, 48, 64, 80 or 128 input/output points It is possible to choose between relay and transistor output type. Triac output types for 110 V AC for sink/source are also available.

Special Features of MITSUBISHI PLC FX2N series:

• Exchangeable interface modules for direct mounting into a base unit
• Standard programming unit interface
• LEDs for indicating the input and output status
• Detachable terminal blocks (except for 16 I/O base units)
• Slot for memory cassettes for up to 16 k steps PLC program
• Integrated real-time clock.

Base Units with 16 I/Os:

Product Details:

MITSUBISHI PLC FX3U series base units are available with 16, 32, 48, 64, 80 input/output points. All base units provide the relay output type.

Special Features of MITSUBISHI PLC FX3U series:

• Exchangeable interface modules for direct mounting into a base unit
• Standard programming unit interface
• LEDs for indicating the input and output status
• Slot for memory cassettes for up to 64k steps PLC program
• Integrated real-time clock.

Base Units with 64 I/Os:

Product Details:

Features:
Responding to Global Competition with More Device Control Possibilities:

• The CP1E provide high cost performance to further reduce costs by allowing you to select the optimal CPU Unit from the ES-type Basic Models or N/S(1)-type Application Models.
• Windows is registered trademarks of Microsoft Corporation in the USA and other countries.
• Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Simple and User Friendly
Easy to use input editor with smart input function:

• When you begin typing an instruction from the keyboard in Ladder Editor Mode,suggested instructions are displayed and the addresses are automatically entered.
• Connecting lines are added automatically based on the cursor position, enabling intuitive ladder programming.

Easy Input Editor:

• Instruction and Address Input Assist Functions: When you begin typing an instruction from the keyboard while in the Ladder Editor Window, suggested instructions are displayed. All you have to do is select the instruction from the list for easy input even if you do not remember the entire mnemonic.
• Address Incrementing: The address of the next operand, including input bits and output bits, is incremented by one and displayed as the default. This enables easily inputting consecutive addresses.

User-friendly Ladder Program Input:

• Automatic Connecting Line Insertion: With the automatic connecting line insertion function the necessary connection is added automatically based on the curser position.
• Automatic Column Insertion When Inserting Instructions: The column is automatically inserted when an instruction is added even if the curser is above another instruction.

Easy to reuse ladder programming

• Copying with Address Incrementing: To create the same group of ladder instructions more than once with the address addition copy function, the instructions can be reused simply by inputting an address offset.

Intuitive Menu Structure:

• Intuitive Menu Display: An intuitively designed menu structure makes it easy to see the overall system simply by looking at the menu for smooth operation without referring to a manual.

International Standards:

• The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, KC: KC Registration, and CE: EU Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.

Product Details:

We are offering PLC Based Control to our clients.

Features:

• Design and wired as per customer requirement
• Suitable for remote control operation
• PLC Panels
• SCADA base Panels
• AC Drive Panels
• DC Drive Panels
• Instrumentation Panels
• M.C.C/P.C.C Panels
• Custam Built OEM Panels, Industrial Panel
• Motor control panel

Product Details:

Pumping, Ventilating and Compressing:

• Centrifugal pumps 
• Radial/axial fans 
• Compressors

Additional Advantages:

• High availability through automatic restart and flying restart after power failures 
• Broken belt detection by monitoring the load torque 
• Pump protection against cavitation 
• Hammer start and blockage clearing modes for clogged pumps 
• PID controller for process values (e.g. temperature, pressure, level, flow) 
• PID auto tuning to optimize controller parameters
• Hibernation mode stops the motor when demand is low 
• Motor staging extends the flow range by adding two more fixed-speed drives (cascade) 
• Frost and condensation protection prevents moisture in motors under extreme environmental conditions.

Moving:

• Belt conveyors 
• Roller conveyors 
• Chain conveyors 
• Bucket conveyors 
• Treadmills

Additional advantages:

• Soft, jerk-free acceleration reduces the stress on the gear units, bearings, drums and rollers 
• Super torque start for conveyor belts with high breakaway torque 
• Dynamic behavior by using braking resistor or DC braking 
• Direct control of mechanical holding brake 
• Broken belt detection by monitoring the load torque 
• Precise stopping with Quick Stop (switch-off positioning) independently from the control cycle.

Processing:

• Single drives in the process industry such as mills, mixers, kneaders, crushers, mechanical presses, agitators, centrifuges.
• Single drives in commercial appliances such as kitchen ovens, mixers, washing machines.
• Main drives in machines with mechanically coupled axes such as ring spinning machines, braiding machines for textiles, ropes and cables.

Additional advantages:

• Frost and condensation protection prevents moisture in motors under extreme environmental conditions 
• Higher productivity without interruptions due to Keep Running mode 
• Exchange of regenerative energy via the DC link 
• Super torque start for machines with a high breakaway torque

Overload Capability Characteristics:

• Low overload (LO) is generally used for applications demanding a low level of dynamic performance (continuous duty), squarelaw torque characteristic with low breakaway torque and low speed precision. For example: centrifugal pumps, radial/axial fans, reciprocating blowers, radial compressors, vacuum pumps, agitators,
• High overload (HO) is generally used for applications demanding a higher dynamic performance (cyclic duty) as well as constant torque characteristics with a high breakaway torque. For example: conveyor belts, geared pumps, eccentric worm pumps, mills, mixers, crushers, vertical conveying equipment, centrifuges,

Product Details:

Isolating Signal Converter 2 outputs DUALCON:
The new DUALCON Isolating Signal Converter canaccept a wide range of inputs including 4-20mA,thermocouple, RTD and voltage signals. The unitsproduce two high level DC outputs of either voltage orcurrent.

• Universal configurable input - user selectable
• 2 configurable Outputs - user selectable
• Full 3-Port Isolation
• Wide range AC or DC Supply
• Isolated Transmitter Supply
• Very High Accuracy, Low Cost
• Only 17.5mm Wide on DIN rail.

Full 3 port isolation is standard as is an isolated transmitter supply which can be used to power any standard 2-wire 4-20mA transmitter. The input type range can be user selected using simple DIL switches inside the unit. All RTD and Thermocouple inputs can be fully linearised. Non-interactive zero and span controls make adjustment of the unit quick and simple. Other features include optional inversion of the input signal, on either one or both of the outputs The unit is supplied with two power supply options, either wide ranging ac or dc. The ac version operates from any sup0ply for 90 to 264 Vac and the dc version operates from 12 to 36 Vdc. For specials such as custom linearisation etc please contact the sales office.
Inputs:

• Standard Ranges are shown below - contact Sales for others.

DD/AC Current and Voltage:

• 0-20mA, 4-20mA, 0-10mA into 15Ω
• 0-1V, 0-10V, 1-5V into M1Ω

Min and Max Full Scale Ranges are:
Note: For input voltages greater than 60Vdc a Divider unit must be specified.

Thermocouples:

• Types E,J,K,N,R,S.T.B linearised or non-linearised
• Ranges: Wide range of inputs.
• Cold junction compensation (can be turned off)
• Upscale or downscale t/c burnout options

Resistance Thermometers:

• 2,3 or 4 wire PT100 or PT1000, linearised or non-linearised.
• Ranges: Wide range of inputs.
• Upscale or downscale RTD burnout options.

Outputs:

• DC Current and Voltage
• 0-20mA, 4-20mA, 0-10mA into maximum 1kΩ
• 0-10V, 1-5V into a minimum 7kΩ

Product Details:

The LOGO! 8 12/24 RCE - 6ED1052-1MD00-0BA8 logic module with a display in three adjustable colours has the protection rating IP20 and uses a 12/24 V DC voltage supply. Up to 400 function blocks can be processed. The device has eight digital inputs, four of which can be used in analogue mode (0-10 V), as well as four digital outputs. The LOGO! 8 12/24 RCE - 6ED1052-1MD00-0BA8 logic module with display is programmable via Ethernet interface. Moreover, it can communicate with other modules of the LOGO! series and SIMATIC S7 devices. The integral web server applications allow wireless monitoring and control via smartphone, tablet or PC. Applications of the LOGO! 8 12/24 RCE - 6ED1052-1MD00-0BA8 logic module range from machine controls in industrial and manufacturing processes, building management systems and time-programmed controls of traffic lights to pump and filter systems. Use in special applications is also possible.

Features:

• LOGO! 12/24RCE
• Logic module with display
• 8 DI (Digital Input) 4 of which can be used as AI (Analogue Inputs)
• 4 DO (Digital Output)
• Memory: 400 blocks
• modularly expandable
• Ethernet
• Integrated web server
• User-defined web pages datalogging
• Standard micro SD card
• for LOGO! SOFT COMFORT from version 8
• older projects executable

Product Details:

We offer Siemens PLC S7 300 to our clients.

Product Details:

We are offering PLC System to our clients.

 

Product Details:

MITSUBISHI PLC FX1S series base units are available with 10 to 30 input/output points. It is possible to choose between relay and transistor output type.

Special Features of MITSUBISHI PLC FX1S series:

• Integrated power supply (AC or DC powered)
• Maintenance-free EEPROM memory
• Ample memory capacity (2000 steps) and device ranges
• High-speed operations
• Incorporated positioning control
• Integrated real-time clock
• System upgrades by exchangeable interface and I/O adapter
• boards for direct fitting into the base unit
• LEDs for indicating the input and output status
• Standard programming unit interface
• User-friendly programming systems, including IEC 61131.3
• (EN 61131.3)-compatible programming software, HMIs and
• hand-held programming units.

Base Units with 10' 14 I/Os:

Product Details:

The SIMATIC S7-1200 system includes three different CPU performance classes: CPU 1211C, 1212C CPU and CPU 1214C All can be enlarged in accordance with the mechanical requirements. For each CPU board, a signal can be added to expand digital or analog I / O without increasing the physical control. Signal Modules can be mounted on the right side of the CPU to extend the digital or analog I / O capacity.

Simple and convenient installation:

• The complete SIMATIC S7-1200 hardware has built-in clip for quick and easy mounting on a standard 35 mm DIN rail. These built-in clip is also extendable. This means, they function as mounting holes for mounting without mounting rail. The SIMATIC S7-1200 hardware can be installed either horizontally or vertically and is absolutely flexible in the installation.

Space Saving Design:

• The SIMATIC S7-1200 hardware has been specifically designed to save space in the cabinet. For example, the CPU is only 110 mm wide 1214C , and the CPU 1212C and the CPU 1211C are only 90 mm wide. Together with the small communication and signal modules, this modular system saves valuable space and provides maximum efficiency and flexibility in the installation process.

Product Details:

The 2nd generation DVP-SX2 series slim type PLC offers 14 digital points and built-in 12-bit analog I/O points. It is extendable with DVP-S series left-side and right-side extension modules.

Applications:

• Used for PID temperature/humidity control, 2-axis AC motor drive constant speed control, temperature control using a analog signal monitoring of a whole factory. (PLC EASY LINK).

Features:

• COM port: Built-in RS-232, RS-485 & USB ports, compatible with ASCII/RTU protocol. Can be master or slave.
• High-Speed Pulse Output: Supports 2 points (Y0, Y2) of 100kHz and 2 points (Y1, Y3) of 10kHz independent high-speed pulse output.
• Built-in High-Speed Counters
• Built-in Analog I/O.

Technical Specifications:

Product Details:

Programmable Automation Controllers- PAC

Programmable Automation Controllers have powerful CPU's for processing information, are robust for harsh environments and can have on board or external I/O for data acquisition and monitoring. PACs are programmable in a wide range of languages including C, C#, C , VB.NET, Ladder Logic, Structured text and more. They are flexible in communication and have Ethernet, RS-232 and RS-485 ports.

The PAC family is a modular network-based PAC with the capability of connecting I/O either through its own dual backplane bus or alternatively through remote I/O units and remote I/O modules.

This new exciting PAC family offers a flexible, versatile and economical solution to a wide range of applications from Data- Acquisition, process control, test & measurement, Motion Control to energy & building management.

PAC family includes WinPAC, XPAC, LinPAC, iPAC, ViewPAC, Motion PAC and μPAC for different requirements in OS, CPU and development platform.

If you are looking for PAC system, please contact us. We will do our best to help you find the a PAC that you are looking for at the most competitive prices possible.

Product Details:

Procured to attain maximum consent and approval of patrons, we present patrons with the best quality of PLC Cards. Procured from trusted source, these PLC cards are used in process control industry. Available with us in various technical specifications, the PLC cards are appreciated for their easy installation, compact design and high functionality. 

Features:

• Unique, inbuilt shaft position controller 
• Intelligent overload protection 
• Inbuilt Configuration Checker 
• Ultra compact size - Less panel space.

Product Applications:

• Extruders, Rolling Mill, Coiler/Uncoiler, Slittors, Wive drawing, Tube Mill, Shed-Line Redor, Carding, Mixers, Machine Tools, Food Machinery, Conveyor, Automated wave housing, Lift, Hoise & Crane.