Product Details:
Model | TM221C16R |
Height | 90 mm |
Width | 95 mm |
Series | Modicon M221 |
Discrete Input Voltage Type | DC |
Analogue Input Resolution | 10 bits |
Component Type | Logic Controller |
LSB Value | 10 mV |
Conversion Time | 1 ms per channel + 1 controller cycle time for analog input |
Voltage State One Guaranteed | Greater than equal to 15 V for input |
Voltage State Zero Guaranteed | Less then equal to 5 V for input |
Discrete Input Current | 7 mA for discrete input,5 mA for fast input |
Input Impedance | 4.9 kOhm for fast input,3.4 kOhm for discrete input,100 kOhm for analog input |
Configurable Filtering Time | 0 - 12 ms for Input |
Discrete Input Output number | 16 |
Output Voltage Limits | 125 V DC - 277 V AC |
Current Per Output Common | 6 A at COM 1 termnal,7 A at COM 0 termnal |
Absolute Accuracy Error | +/- 1 % of full scale for analog input |
Rated Supply Voltage | 100 - 240 V AC |
Switching Frequency | 20 switching operations/minute with maximum load |
Mechanical Durability | Greater than equal to 20000000 cycles for relay output |
Minimum Load | 1 mA at 5 V DC for relay output |
Reset Time | 1 sec |
Memory Capacity | 256 kB for user application and data RAM with 10000 instructions,256 kB for internal variables RAM |
Data Storage Equipment | 2 GB SD card optional |
Number of Input Output Expansion Module | Less than equal to 4 for transistor output,Less then equal to 4 relay output |
Backup Time | 1 year at 25 Deg C by interruption of power supply |
Battery Type | BR2032 lithium non-rechargeable |
Battery life | 4 Year |
Data Backed Up | 256 kB built-in flash memory for backup of application and data |
Discrete Input Number | 9 discrete input conforming to IEC 61131-2 Type 1 |
Execution time for One K Instruction | 0.3 ms for event and periodic task |
Execution Time Per Instruction | 0.2 microsecond Boolean |
Exct Time for Event Task | 60 microsecond response time |
Maximum Size of Object Areas | 512 %M memory bits,8000 %MW memory words,512 %KW constant words,255 %TM timers,255 %C counters |
Clock Drift | Less than equal to 30 s/month at 25 Deg C |
Supply Voltage Limits | 85 - 264 V |
Regulation Loop | Adjustable PID regulator up to 14 simultaneous loops |
Counting Input number | 4 fast input (HSC mode) (counting frequency 100 kHz) |
Control Signal Type | Single phase,Dual phase (pulse/direction),Dual phase (quadrature) Frequency meter |
Supply | Serial link supply at 5 V 200 mA |
Sensor Power Supply | 24 V DC at 250 mA supplied by the controller |
Analogue Input number | 2 at input range 0-10 V |
Depth | 70 mm |
Product Weight | 0.346 kg |
Environmental Characteristic | Ordinary and hazardous location |
Resistance to Electrostatic Discharge | 4 kV on contact conforming to EN/IEC 61000-4-2,8 kV in air conforming to EN/IEC 61000-4-2 |
Network Frequency | 50-60 Hz |
Resistance to Magnetic Fields | 30 A/m 50/60 Hz conforming to EN/IEC 61000-4-8 |
Immunity to Microbreaks | 10 ms |
Operation Ambient Air Temperature | -10 to 55 Deg C for horizontal installation,-10 to 35 Deg C for vertical installation |
Storage Ambient Air Temperature | -25 to 70 Deg C |
IP Degree of Protection | IP20 with protective cover in place |
Pollution Degree | Less than equal to 2 |
Discrete Output Type | Relay Normally Open |
Operating Altitude | 0 - 2000 m |
Storage Altitude | 0 - 3000 m |
Shock Resistance | 98 m/s2 (test wave duration11 ms) |
Inrush Current | Less then equal to 40 A |
Discrete Output Number | 7 Relay |
Discrete Output Voltage | 5-125 V DC,5-250 V AC |
Discrete Output Current | 2 A |
Power Supply Output Current | 0.325 A at 5 V for expansion bus,0.12 A at 24 V for expansion bus |
Discrete Input Logic | Sink or source (positive/negative) |
Discrete Input Voltage | 24 V |
Electrical durability Inductive:
Local Signalling:
Electrical Connection:
Cable Distance Between Devices:
Insulation:
Resistance to Fast Transients:
Product Details:
Brand | Schneider |
Shock Resistance | 98 m/s2 (test wave duration11 ms) |
Operating Altitude | 0 to 2000 m |
Model No | M340 |
Range of Product | Modicon |
Product or Component Type | Logic Controller |
Rated Ssupply Voltage | 24 V DC |
Discrete Input Number | 9 discrete input conforming to IEC 61131-2 Type 1 |
Analogue Input Number | 2 at input range 0 to 10 V |
Discrete Output Type | Relay Normally Open |
Discrete Output Number | 7 relay |
Discrete Output Voltage | 5 to 125 V DC / 5 to 250 V AC |
Discrete Output Current | 2 A |
Discrete I O Number | 16 |
Supply Voltage Limits | 85 to 264 V |
Network Frequency | 50/60 Hz |
Inrush Current | Less Than or Equal 40 A |
Power Supply Output Current | 0.325 A at 5 V for expansion bus / 0.12 A at 24 V for expansion bus |
Discrete Input Logic | Sink or source (positive/negative) |
Discrete Input Voltage | 24 V |
Discrete Input Voltage Type | DC |
Analogue Input Resolution | 10 bits |
LSB Value | 10 mV |
Conversion Time | 1 ms per channel + 1 controller cycle time for analog input |
Discrete Input Current | 7 mA for discrete input / 5 mA for fast input |
Configurable Filtering Time | 0 ms for input / 12 ms for input / 3 ms for input |
Output Voltage Limits | 125 V DC / 277 V AC |
Current Per Output Common | 6 A at COM 1 termnal / 7 A at COM 0 termnal |
Absolute Accuracy Error | +/- 1 % of full scale for analog input |
Switching Frequency | 20 switching operations/minute with maximum load |
Mechanical Durability | Greater Than or Equal 20000000 cycles for relay output |
Minimum Load | 1 mA at 5 V DC for relay output |
Protection Type | Without protection at 5 A |
Reset Time | 1 s |
Memory Capacity | 256 kB for user application and data RAM with 10000 instructions / 256 kB for internal variables RAM |
Data Backed Up | 256 kB built-in flash memory for backup of application and data |
Data Storage Equipment | 2 GB SD card optional |
Battery Type | BR2032 lithium non-rechargeable,battery life 4 yr |
Realtime Clock | With |
Clock Drift | Less Than or Equal 30 s/month at 25 Deg C |
Regulation Loop | Adjustable PID regulator up to 14 simultaneous loops |
Counting Input Number | 4 fast input (HSC mode) (counting frequency 100 kHz),counting capacity 32 bits |
Supply | Serial serial link supply at 5 V 200 mA |
Port Ethernet | 10BASE-T/100BASE-TX 1 port with 100 m copper cable |
Marking | CE |
Sensor Power Supply | 24 V DC at 250 mA supplied by the controller |
Height | 90 mm |
Depth | 70 mm |
Width | 95 mm |
Product Weight | 0.346 Kg |
Immunity to Microbreaks | 10 ms |
Ambient Air Temperature for Operation | -10 to 55 Deg C for horizontal installation / -10 to 35 Deg C for vertical installation |
Ambient Air Temperature for Sstorage | -25 to 70 Deg C |
Relative Humidity | 10 to 95 % without condensation in operation / 10 to 95 % without condensation in storage |
IP Degree of Protection | IP20 with protective cover in place |
Storage Altitude | 0 to 3000 m |
Number of I/O expansion module | <= 4 for transistor output <= 4 for relay output |
Power consumption in VA | <= 49 VA at 100 to 240 V with max number of I/O expansion module <= 33 VA at 100 to 240 V without I/O expansion module |
Permitted overload on inputs | +/- 30 V DC for analog input with 5 min maximum +/- 13 V DC for analog input permanent |
Voltage state 1 guaranteed | >= 15 V for input |
Voltage state 0 guaranteed | <= 5 V for input |
Input Impedance | 4.9 kOhm for fast input 3.4 kOhm for discrete input 100 kOhm for analog input |
Response time | 10 ms turn-on operation for output 35 µs turn-off operation for input; I2 to I5 terminal 10 ms turn-off operation for output 5 µs turn-on operation for fast input; I0, I1, I6, I7 terminal 35 µs turn-on operation for input; other terminals terminal 5 µs turn-off operation for fast input; I0, I1, I6, I7 terminal 100 µs turn-off operation for input; other terminals terminal |
Electrical durability | Inductive AC-15, (cos phi = 0.35) 240 V / 120 VA : 100000 cycles Resistive DC-12, 24 V / 48 W : 100000 cycles Resistive AC-12, 120 V / 240 VA : 100000 cycles Inductive AC-15, (cos phi = 0.35) 240 V / 36 VA : 300000 cycles Resistive AC-12, 120 V / 80 VA : 300000 cycles Inductive (L/R = 7 ms) DC-13, 24 V / 24 W : 100000 cycles Resistive DC-12, 24 V / 16 W : 300000 cycles Inductive (L/R = 7 ms) DC-13, 24 V / 7.2 W : 300000 cycles Inductive AC-14, (cos phi = 0.7) 240 V / 240 VA : 100000 cycles Inductive AC-15, (cos phi = 0.35) 120 V / 60 VA : 100000 cycles Inductive AC-14, (cos phi = 0.7) 240 V / 72 VA : 300000 cycles Inductive AC-15, (cos phi = 0.35) 120 V / 18 VA : 300000 cycles Resistive AC-12, 240 V / 480 VA : 100000 cycles Inductive AC-14, (cos phi = 0.7) 120 V / 120 VA : 100000 cycles Resistive AC-12, 240 V / 160 VA : 300000 cycles Inductive AC-14, (cos phi = 0.7) 120 V / 36 VA : 300000 cycles |
Maximum size of object areas | 512 %M memory bits 8000 %MW memory words 512 %KW constant words 255 %TM timers 255 %C counters |
Execution time per instruction | 0.2 µs Boolean |
Exct time for event task | 60 µs response time |
Integrated connection type | USB port with connector mini B USB 2.0 Ethernet with connector RJ45 Non isolated serial link "serial 1" with connector RJ45 and interface RS232/RS485 |
Transmission rate | 1.2 to 115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m - communication protocol: RS485 1.2 to 115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m - communication protocol: RS232 480 Mbit/s - communication protocol: USB |
Product Details:
Current | 2 A, 0.5 A, >2 A, 1 A, 0.1 A |
No of Inputs | 16 Digits, 9 Digits, 24 Digits, 14 Digits |
Display Type | LED, 7 Segment LED |
Application | Industrial |
Brand | Schneider |
Size | As Required |
Product Details:
Current | >2 A |
Brand | Schneider |
Product Details:
Brand | Schneider |
Model No | HMISCU6A5 |
Inrush Current | Less Than or Equal 30 A |
Power Consumption | 15 W |
Local Signalling | No indicator |
Software Designation | SoMachine |
Processor Name | CPU RISC |
Processor Frequency | 333 MHz |
Realtime Clock | Built-in |
Downloadable Protocols | Modbus / Modbus TCP/IP / CANopen |
Enclosure Material | PC/PBT |
Discrete Input Voltage | 24 V DC discrete input logicsink or source (positive/negative) |
Range of Product | Magelis SCU |
Number of Common Point | 1 fast input (HSC mode) / 2 digital input |
Discrete Input Current | 7.83 mA for fast input / 5 mA for digital |
Input Impedance | 4.7 kOhm / 2.81 kOhm |
Connection Pitch | 0.14 in (3.5 mm) |
Overvoltage Protection | With |
Height | 2.95 in (74.95 mm) |
Width | 5.04 in (128 mm) |
Depth | 4.02 in (102 mm) |
Product Weight | 1.13 lb(US) (0.512 kg) |
Marking | CE |
Product or Component Type | Small touch HMI controller |
Ambient Air Temperature for Operation | 32 to 122 Deg F (0 to 50 Deg C) |
Ambient Air Temperature for Storage | -4 to 140 Deg F (-20 to 60 Deg C) |
Operating Altitude | Less Than or Equal 6561.68 ft (2000 m) |
Storage Altitude | 0 to 10000 m |
Maximum Pressure | 800 to 1114 hPa |
IP Degree of Protection | IP65 front panel conforming to IEC 60529 / IP20 rear panel conforming to IEC 60529 |
NEMA Degree of Protection | NEMA 4X front panel |
Pollution Degree | 2 conforming to IEC 60664 |
Environmental Characteristic | Corrosive gas free |
Display Size | 3.5 inch |
Touch Panel | Analogue |
Backlight Lifespan | 50000 hours with 65000 Colours |
Supply | External Source |
Rated Supply Voltage | 24 V at 20.4 to 28.8 V DC |
Immunity to Microbreaks | Less Than or Equal 10 ms |
Device presentation | Complete product |
View angle horiz x vert | 60° left 60° right 40° top 60° bottom |
Character font | ASCII Chinese (simplified Chinese) Japanese (ANK, Kanji) Korean Taiwanese (traditional Chinese) |
Memory description | 128 MB flash memory, type: NAND 128 kB internal data storage memory, type: FRAM 128 MB application run memory, type: DRAM |
Integrated connection type | 1 RJ45 connector serial link with RS232/RS485 interface at <= 115.2 kbits/s 1 RJ45 connector Ethernet TCP/IP 1 USB 2.0 type mini B 1 USB 2.0 type A SUB-D 9 connector CANopen master bus |
Fixing mode | By 1 nut - diameter: Ø 22 mm, mounting on: 1 to6 mm thick panel |
Shock resistance | 147 m/s² (duration=11 ms) conforming to IEC 60068-2-27 on DIN rail 294 m/s² (duration=6 ms) conforming to IEC 60068-2-27 on panel mounting |
Vibration resistance | +/- 3.5 mm (f=5 to 9 Hz) conforming to IEC 60068-2-6 1 gn (f=9 to 150 Hz) conforming to IEC 60068-2-6 |
Electromagnetic compatibility | Electrostatic discharge immunity test - test level: 8 kV, air discharge conforming to IEC 61000-4-2 Electrostatic discharge immunity test - test level: 6 kV, contact discharge conforming to IEC 61000-4-2 Susceptibility to electromagnetic fields - test level: 10 V/m, 80 MHz to 3 GHz conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test - test level: 2 kV, power lines conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV, between analogue I/O and operating voltage conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 2 kV, relay wires conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV, Ethernet line conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV, COM line conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV, CAN line conforming to IEC 61000-4-4 Surge immunity test - test level: 2 kV, power supply (common mode) conforming to IEC 61000-4-5 Surge immunity test - test level: 1 kV, power supply (differential mode) conforming to IEC 61000-4-5 Surge immunity test - test level: 1 kV common mode, digital I/O conforming to IEC 61000-4-5 Surge immunity test - test level: 0.5 kV differential mode, digital I/O conforming to IEC 61000-4-5 Conducted RF disturbances - test level: 10 V, 0.15 to 80 MHz conforming to IEC 61000-4-6 Conducted emission - test level: 150 kHz to 30 MHz conforming to EN 55011 Radiated emission - test level: 30 MHz to 1 GHz conforming to EN 55011 |
Discrete input number | 2 fast input (normal mode) conforming to IEC 61131-2 Type 1 14 digital input conforming to IEC 61131-2 Type 1 |
Product Details:
Backup Time | 2 years at 25 Deg C |
Accuracy | +/- 0.1 % at 0.02 to 0.1 kHz for fast output, +/- 1 % at 0.1 to 1 kHz for fast output |
Model No | TM241CE24T |
Range of Product | Modicon M241 |
Product or Component Type | Logic Controller |
Rated Supply Voltage | 24 V DC |
Discrete Input Number | 14 discrete input including 8 fast input conforming to IEC 61131-2 Type 1 |
Discrete Output Type | Transistor |
Discrete Output Number | 10 transistor including 4 fast output |
Discrete Output Voltage | 24 V DC for transistor output |
Supply Voltage Limits | 20.4 to 28.8 V |
Inrush Current | Less Than or Equal 50 A |
Power Consumption | 32.6 to 40.4 W with max number of I/O expansion module |
Discrete Input Logic | Sink or Source |
Discrete Input Voltage | 24 V |
Discrete Input Voltage Type | DC |
Discrete Input Current | 5 mA for input / 10.7 mA for fast input |
Input Impedance | 4.7 kOhm for input / 2.81 kOhm for fast input |
Discrete Output Logic | Positive logic (source) |
Output Voltage Limits | 30 V DC |
Voltage Drop | Less Than or Equal 1 V |
Tungsten Load | Less Than or Equal 2.4 W |
Reset Time | 10 ms automatic reset output / 12 s automatic reset fast output |
Memory Capacity | 8 MB for program / 64 MB for system memory RAM |
Data Backed Up | 128 MB built-in flash memory for backup of user programs |
Data Storage Equipment | Less Than or Equal 32 GB SD card optional |
Battery Type | BR2032 lithium non-rechargeable, battery life 4 yr |
Realtime Clock | With |
Clock Drift | Less Than or Equal 60 s/month at 25 Deg C |
Counting Input Number | 4 fast input (HSC mode) at 200 kHz / 14 standard input at 1 kHz |
Supply | Serial link supply "serial 1" at 5 V, 200 mA |
Communication Port Protocol | Modbus non isolated serial link with master/slave method |
Port Ethernet | 1 - 10BASE-T/100BASE-TX port with copper cable support |
Marking | CE |
Web Services | Web Server |
Number of Slave | 16 Ethernet/IP / 64 Modbus TCP |
Cycle Time | 10 ms 16 Ethernet/IP / 64 ms 64 Modbus TCP |
Height | 90 mm |
Depth | 95 mm |
Width | 150 mm |
Product Weight | 0.53 Kg |
Immunity to Microbreaks | 10 ms |
Ambient Air Temperature for Operation | -10 to 55 Deg C for horizontal installation / -10 to 50 Deg C for vertical installation |
Ambient Air Temperature for Storage | -25 to 70 Deg C |
Relative Humidity | 10 to 95 % without condensation in operation / 10 to 95 % without condensation in storage |
IP Degree of Protection | IP20 with protective cover in place |
Pollution Degree | 2 |
Operating Altitude | 0 to 2000 m |
Storage Altitude | 0 to 3000 m |
Shock Resistance | 15 gn for 11 ms |
Discrete output current | 0.5 A with Q0 to Q9 terminal(s) for transistor output 0.1 A with Q0 to Q3 terminal(s) for fast output (PTO mode) |
Discrete I/O number | 24 |
Number of I/O expansion module | 7 (local I/O architecture) 14 (remote I/O architecture) |
Voltage state 1 guaranteed | >= 15 V for input |
Voltage state 0 guaranteed | <= 5 V for input |
Response time | 50 µs turn-on operation with I0 to I13 terminal(s) for input 50 µs turn-off operation with I0 to I13 terminal(s) for input <= 2 µs turn-on operation with I0 to I7 terminal(s) for fast input <= 2 µs turn-off operation with I0 to I7 terminal(s) for fast input <= 34 µs turn-on operation with Q0 to Q9 terminal(s) for output <= 250 µs turn-off operation with Q0 to Q9 terminal(s) for output <= 2 µs turn-on operation with Q0 to Q3 terminal(s) for fast output <= 2 µs turn-off operation with Q0 to Q3 terminal(s) for fast output |
Configurable filtering time | 1 µs for fast input 12 ms for fast input 0 ms for input 1 ms for input 4 ms for input 12 ms for input |
Current per output common | 2 A with Q0 to Q3 terminal for fast output 2 A with Q4 to Q7 terminal for output 1 A with Q8 to Q9 terminal for output |
Output frequency | <= 20 kHz for fast output (PWM mode) <= 100 kHz for fast output (PLS mode) <= 1 kHz for output |
Leakage current | <= 5 µA for output |
Protection type | Short-circuit and overload protection with automatic reset Reverse polarity protection for fast output Short-circuit protection |
Execution time for 1 Kinstruction | 0.3 ms for event and periodic task 0.7 ms for other instruction |
Application structure | 8 event tasks 4 cyclic master tasks 3 cyclic master tasks + 1 freewheeling task 8 external event tasks |
Positioning functions | PTO function 4 channel(s) (positioning frequency: 100 kHz) PTO function 4 channel(s) for transistor output (positioning frequency: 1 kHz) |
Control signal type | A/B signal at 100 kHz for fast input (HSC mode) Pulse/Direction signal at 200 kHz for fast input (HSC mode) Single phase signal at 200 kHz for fast input (HSC mode) |
Integrated connection type | USB port with connector mini B USB 2.0 Ethernet with connector RJ45 Non isolated serial link "serial 1" with connector RJ45 and interface RS232/RS485 Non isolated serial link "serial 2" with connector removable screw terminal block and interface RS485 |
Product Details:
Brand | Schneider |
Model | TM241CE24U |
Backup Time | 2 years at 25 Deg C |
Pollution Degree | 2 |
Accuracy | +/- 0.1 % at 0.02 - 0.1 kHz for fast output, +/- 1 % at 0.1 - 1 kHz for fast output |
Series | Modicon M241 |
Component Type | Logic Controller |
Rated Supply Voltage | 24 V DC |
Discrete Input Number | 14 discrete input including 8 fast input conforming to IEC 61131-2 Type 1 |
Discrete Output Type | Transistor |
Discrete Output Number | 10 transistor including 4 fast output |
Discrete Output Voltage | 24 V DC for transistor output |
Number of Input Output Expansion Module | 7 (local I/O architecture), 14 (remote I/O architecture) |
Supply Voltage Limits | 20.4 - 28.8 V |
Inrush Current | Less than equal to 50 A |
Power Consumption in W | 32.6 - 40.4 W with max number of I/O expansion module |
Discrete Input Logic | Sink or source |
Discrete Input Voltage | 24 V |
Discrete Input Voltage Type | DC |
Voltage State One Guaranteed | Greater than equal to 15 V for input |
Voltage State Zero Guaranteed | Less than equal to 5 V for input |
Discrete Input Current | 5 mA for input, 10.7 mA for fast input |
Input Impedance | 4.7 kOhm for input, 2.81 kOhm for fast input |
Discrete Output Logic | Negative logic (sink) |
Output Voltage Limits | 30 V DC |
Leakage Current | Less than equal to 5 Ampere for output |
Tungsten Load | Less than equal to 2.4 W |
Reset Time | 10 ms automatic reset output, 12 s automatic reset fast output |
Memory Capacity | 8 MB for program, 64 MB for system memory RAM |
Data Backed Up | 128 MB built-in flash memory for backup of user programs |
Data Storage Equipment | Less than equal to 32 GB SD card optional |
Battery Type | BR2032 lithium non-rechargeable |
Battery Life | 4 years |
Execution Time for One K Instruction | 0.3 ms for event and periodic task, 0.7 ms for other instruction |
Clock Drift | Less than equal to 60 s/month at 25 deg C |
Counting Input Number | 4 fast input (HSC mode) at 200 kHz, 14 standard input at 1 kHz |
Supply | Serial link supply "serial 1" at 5 V, 200 mA |
Communication Port Protocol | Modbus non isolated serial link with master/slave method |
Port Ethernet | 1 - 10BASE-T/100BASE-TX port with copper cable support |
Number of Slave | 16 Ethernet/IP, 64 Modbus TCP |
Cycle Time | 10 ms 16 Ethernet/IP, 64 ms 64 Modbus TCP |
Height | 90 mm |
Depth | 95 mm |
Width | 150 mm |
Product Weight | 0.53 kg |
Resistance to Electrostatic Discharge | 4 kV on contact conforming to EN/IEC 61000-4-2, 8 kV in air conforming to EN/IEC 61000-4-2 |
Immunity to Microbreaks | 10 ms |
ambient air temPerature for Operation | -10 to 55 Deg C for horizontal installation, -10 to 50 Deg C for vertical installation |
storage Ambient Air Temperature | -25 to 70 Deg C |
Relative Humidity | 10 to 95 % without condensation in operation, 10 - 95 % without condensation in storage |
IP Degree of Protection | IP20 with protective cover in place |
Response time | 50 µs turn-on operation with I0 to I13 terminal(s) for input 50 µs turn-off operation with I0 to I13 terminal(s) for input <= 2 µs turn-on operation with I0 to I7 terminal(s) for fast input <= 2 µs turn-off operation with I0 to I7 terminal(s) for fast input <= 34 µs turn-on operation with Q0 to Q9 terminal(s) for output <= 250 µs turn-off operation with Q0 to Q9 terminal(s) for output <= 2 µs turn-on operation with Q0 to Q3 terminal(s) for fast output <= 2 µs turn-off operation with Q0 to Q3 terminal(s) for fast output |
Configurable filtering time | 1 µs for fast input 12 ms for fast input 0 ms for input 1 ms for input 4 ms for input 12 ms for input |
Output frequency | <= 20 kHz for fast output (PWM mode) <= 100 kHz for fast output (PLS mode) <= 1 kHz for output |
Positioning functions | PTO function 4 channel(s) (positioning frequency: 100 kHz) PTO function 4 channel(s) for transistor output (positioning frequency: 1 kHz) |
Control signal type | A/B signal at 100 kHz for fast input (HSC mode) Pulse/Direction signal at 200 kHz for fast input (HSC mode) Single phase signal at 200 kHz for fast input (HSC mode) |
Integrated connection type | USB port with connector mini B USB 2.0 Ethernet with connector RJ45 Non isolated serial link "serial 1" with connector RJ45 and interface RS232/RS485 Non isolated serial link "serial 2" with connector removable screw terminal block and interface RS485 |
Transmission rate | 1.2 to 115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m - communication protocol: RS485 1.2 to 115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m - communication protocol: RS232 480 Mbit/s for bus length of 3 m - communication protocol: USB 10/100 Mbit/s - communication protocol: Ethernet |
Communication service | FDR Downloading IEC VAR ACCESS Monitoring NGVL Programming Updating firmware SMS notifications DHCP server (via TM4 Ethernet switch network module) DHCP client (embedded Ethernet port) SNMP client/server FTP client/server SQL client Modbus TCP client I/O scanner Ethernet/IP originator I/O scanner (embedded Ethernet port) Ethernet/IP target, Modbus TCP server and Modbus TCP slave Send and receive email from the controller based on TCP/UDP library Web server (WebVisu & XWeb system) OPC UA server DNS client |
Local signalling | 1 LED green for SD card access (SD) 1 LED red for BAT 1 LED green for SL1 1 LED green for SL2 1 LED per channel green for I/O state 1 LED red for I/O error (I/O) 1 LED red for bus fault on TM4 (TM4) 1 LED green for Ethernet port activity 1 LED red for module error (ERR) 1 LED green for PWR 1 LED green for RUN |
Product Details:
Usage/Application | Industrial |