Frontline Technologies
Ganapathy, Coimbatore, Tamil Nadu
GST No. 33AGEPD9526C1ZU
TrustSEAL Verified
Call 0804763090584% Response Rate
SEND EMAIL

Schneider Soft Starter


Schneider Soft Starter Altistart 22

Schneider Soft Starter Altistart 22
  • Schneider Soft Starter Altistart 22
  • Schneider Soft Starter Altistart 22
  • Schneider Soft Starter Altistart 22
Get Best Quote
Approx. Price: Rs 2,000 / NumberGet Latest Price
Product Brochure

Product Details:

BrandSchneider
Phase3 Phase
Assembly StyleWith Heat Sink
Minimum Switching Current100 mA 12 V DC relay outputs
Control Circuit Consumption20 W
Function AvailableInternal Bypass
Range Of ProductAltistart 22
Ip Degree Of ProtectionIP20
Utilisation CategoryAC-53A
Component NameATS22
Depth6.65 in (169 mm)
Height10.43 in (265 mm)
Communication Port ProtocolModbus
Connector Type1 RJ45
Discrete Input Number3
Discrete Output Number2
Icl Starter Rating32 A connection in the motor supply line for standard applications
Network Frequency45 to 66 Hz
Noise Level45 dB
Operating PositionVertical +/- 10 degree
Product DestinationAsynchronous motors
Product Or Component TypeSoft starter
Product Specific ApplicationPumps and fans
Ptc Probe Input750 Ohm
Supply Frequency50 to 60 Hz - 10 to 10 %
Supply Voltage Limits177 to 660 V
Width5.12 in (130 mm)
Model NoATS22D32S6U
Rated Supply Voltage208 to 600 V - 15 to 10 %
Motor Power20 hp 460 V / 25 hp 575 V / 10 hp 230 V / 7.5 hp 208 V
Factory Setting Current27 A
Power Dissipation44 W for standard applications
Type of StartStart with torque control (current limited to 3.5 In)
Device ConnectionIn the motor supply line
Control Circuit Voltage110 V -15 to 10 % 50/60 Hz
Discrete Input TypeLogic LI1, LI2, LI3 5 mA 20 kOhm
Discrete Input Voltage110 V Less Than or Equal 121 V
Output Current0.4 to 1 Icl adjustable
Communication Data LinkSerial
Physical interfaceRS485 multidrop
Transmission Rate4800, 9600 or 19200 bps
Installed Device31
MarkingCE
Type of CoolingForced Convection
Product Weight15.43 lb(US) (7 kg)
Shock Resistance15 gn 11 ms EN/IEC 60068-2-27
Pollution DegreeLevel 2 IEC 60664-1
Relative Humidity0 to 95 % without condensation or dripping water EN/IEC 60068-2-3
Ambient Air Temperature for Storage-13 to 158 Deg F (-25 to 70 Deg C)

We offer Schneider Soft Starter Altistart 22 to our clients.

Technical Specifications:
Discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Maximum switching current 5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs
Discrete input logic Positive logic LI1, LI2, LI3 < 20 V and <= 15 mA > 79 V <= 2 mA
Protection type Phase failure line
Thermal protection starter
Thermal protection motor
Electromagnetic compatibility Conducted and radiated emissions level A IEC 60947-4-2
Damped oscillating waves level 3 IEC 61000-4-12
Electrostatic discharge level 3 IEC 61000-4-2
Immunity to electrical transients level 4 IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3
Voltage/Current impulse level 3 IEC 61000-4-5
Standards EN/IEC 60947-4-2
Product certifications CCC
CSA
C-Tick
GOST
UL
Vibration resistance 1.5 mm 2 to 13 Hz EN/IEC 60068-2-6
1 gn 13 to 200 Hz EN/IEC 60068-2-6
Ambient air temperature for operation 14 to 104 °F (-10 to 40 °C) without derating
> 104 to < 140 °F (> 40 to < 60 °C) with current derating 2.2 % per °C
Operating altitude <= 3280.84 ft (1000 m) without derating
> 3280.84.< 6561.68 ft (> 1000.< 2000 m) with current derating of 2.2 % per additional 100 m
Request
Callback


Additional Information:

  • Item Code: ATS22
Yes! I am Interested

Schneider Soft Starter Altistart 48

Schneider Soft Starter Altistart 48
  • Schneider Soft Starter Altistart 48
  • Schneider Soft Starter Altistart 48
  • Schneider Soft Starter Altistart 48
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandSchneider
Control Circuit Consumption30 W
Assembly StyleWith Heat Sink
Function AvailableExternal bypass (optional)
Range Of ProductAltistart 48
Ip Degree Of ProtectionIP00
Device Short NameATS48
Utilisation CategoryAC-53A
Depth265 mm
Height340 mm
Discrete Output Number2
Motor Starter TypeSoft starter
Network Frequency47.5 to 63 Hz
Noise Level50 dB
Operating PositionVertical +/- 10 degree
Product DestinationAsynchronous Motors
Product Or Component TypeSoft Starter
Product Specific ApplicationHeavy duty industry and pumps
Supply Frequency50 to 60 Hz (- 5 to 5 %)
Supply Voltage Limits195 to 456 V
Width200 mm
Model NoATS48C17Q
Rated Supply Voltage230 to 415 V (- 15 to 10 %)
Power Dissipation in WFor severe applications 391 W / For standard applications 479 W
Type of StartStart with torque control (current limited to 5 In)
Device ConnectionIn the motor supply line / To the motor delta terminals
Factory Setting Current162 A
Control Circuit Voltage220 - 15 % to 415 + 10 %, 50/60 Hz
Output Absolute Accuracy Precision+/- 5 %
Minimum Switching CurrentRelay outputs 10 mA at 6 V DC
Discrete Input Number5
Discrete Input Voltage24 V (Less Than or Equal 30 V)
Supply Inrush CurrentAdjustable 0.4 to 1.3 Icl
Analogue Output Type(AO) current output 0-20 mA or 4-20 mA Less Than or Equal 500 Ohm
Communication Port ProtocolModbus
Connector Type1 RJ45
Communication Data LinkSerial
Physical InterfaceRS485 multidrop
Transmission Rate4800, 9600 or 19200 bps
Installed Device31
MarkingCE
Type of CoolingForced Convection
Product Weight12.4 Kg
Shock Resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27
Pollution DegreeLevel 3 conforming to IEC 60664-1
Relative Humidity0 to 95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Ambient Air Temperature for Storage25 to 70 DegC

We offer Schneider Soft Starter Altistart 48 to our clients.

Technical Specifications:
Motor power kW75 kW at 230 V (connection to the motor delta terminals) for severe applications
75 kW at 400 V (connection in the motor supply line) for severe applications
90 kW at 230 V (connection to the motor delta terminals) for standard applications
90 kW at 400 V (connection in the motor supply line) for standard applications
110 kW at 400 V (connection to the motor delta terminals) for severe applications
132 kW at 400 V (connection to the motor delta terminals) for standard applications
37 kW at 230 V (connection in the motor supply line) for severe applications
45 kW at 230 V (connection in the motor supply line) for standard applications
IcL starter rating170 A (connection in the motor supply line) for severe applications
294 A (connection to the motor delta terminals) for severe applications
294 A (connection to the motor delta terminals) for standard applications
170 A (connection in the motor supply line) for standard applications
Discrete output type(LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO
Maximum switching currentLogic output 0.2 A at 30 V DC
Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5, L/R = 20 ms
Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5, L/R = 20 ms
Discrete input typePTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
Discrete input logicPositive logic (Stop, Run, LI3, LI4) state 0 < 5 V and <= 2 mA, state 1 > 11 V and >= 5 mA
Protection typePhase failure (line)
Thermal protection (motor)
Thermal protection (starter)
Power range30 to 50 kW at 200 to 240 V 3 phases
55 to 100 kW at 380 to 440 V 3 phases
55 to 100 kW at 200 to 240 V 3 phases
110 to 220 kW at 380 to 440 V 3 phases
Electromagnetic compatibilityConducted and radiated emissions conforming to IEC 60947-4-2 level A
Conducted and radiated emissions conforming to IEC 60947-4-2 level B
Damped oscillating waves conforming to IEC 61000-4-12 level 3
Electrostatic discharge conforming to IEC 61000-4-2 level 3
Immunity to electrical transients conforming to IEC 61000-4-4 level 4
Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3 level 3
Voltage/Current impulse conforming to IEC 61000-4-5 level 3
StandardsEN/IEC 60947-4-2
Product certificationsCCC
CSA
C-Tick
DNV
GOST
NOM 117
SEPRO
TCF
UL
Vibration resistance1 gn (f = 13 to 200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f = 2 to 13 Hz) conforming to EN/IEC 60068-2-6
Request
Callback


Additional Information:

  • Item Code: ATS48
Yes! I am Interested

Schneider ATS01 Soft Starter Altistart

Schneider ATS01 Soft Starter Altistart
  • Schneider ATS01 Soft Starter Altistart
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandSchneider
Assembly StyleWith Heat Sink
Function AvailableIntegrated Bypass
Range Of ProductAltistart 01
Ip Degree Of ProtectionIP20
Device Short NameATS01
Utilisation CategoryAC-53B EN/IEC 60947-4-2
Depth131 mm
Height154 mm
Current Consumption110 A at nominal load
Icl Starter Rating22 A
Motor Power Kw11 kW 3 phases 380 to 415 V / 7.5 kW 3 phases 380 to 415 V
Motor Starter TypeSoft starter
Network Frequency47.5 to 63 Hz
Operating PositionVertical +/- 10 degree
Product DestinationAsynchronous motors
Product Or Component TypeSoft starter
Product Specific ApplicationSimple Machine
Supply Frequency50 to 60 Hz - 5 to 5 %
Supply Voltage Limits342 to 456 V
Width45 mm
Model NoATS01N222QN
Network Number of Phase3 Phase
Rated Supply Voltage380 to 415 V - 10 to 10 %
Type of startStart with Voltage Ramp
Power Dissipation124.5 W in transient state, 4.5 W at full load and at end of starting
Output VoltageLess Than or Equal Power Supply Voltage
Control Circuit VoltageBuilt into the starter
Starting Time1 s 100 / 10 s 10 / 5 s 20 / Adjustable from 1 to 10 s
Deceleration Time SymbAdjustable from 1 to 10 s
Starting Torque30 to 80 % of starting torque of motor connected directly on the line supply
Discrete input TypeLogic LI1, LI2, BOOST stop, run and boost on start-up functions Less Than or Equal 8 mA 27 kOhm
Discrete Input Voltage24 to 40 V
Discrete Output Current2 A DC-13 / 3 A AC-15
Discrete Output TypeOpen collector logic LO1 end of starting signal / Relay outputs R1A, R1C NO
Discrete Output Voltage24 V 6 to 30 V open collector logic
Minimum Switching Current10 mA 6 V DC relay outputs
Display Type1 LED green starter powered up / 1 LED yellow nominal voltage reached
Tightening Torque0.5 N.m / 1.9 to 2.5 N.m
MarkingCE
Product Weight0.56 Kg
Compatibility CodeATS01N2
Power Range7 to 11 kW at 380 to 440 V 3 phases
StandardsEN/IEC 60947-4-2
Pollution Degree2 EN/IEC 60947-4-2
Vibration Resistance1.5 mm peak to peak 3 to 13 Hz EN/IEC 60068-2-6 / 1 gn 13 to 150 Hz EN/IEC 60068-2-6
Shock Resistance15 gn 11 ms EN/IEC 60068-2-27
Relative Humidity5 to 95 % without condensation or dripping water EN/IEC 60068-2-3
Ambient Air Temperature for Operation-10 to 40 Deg C without derating/ 40 to 50 Deg C with current derating of 2 % per Deg C
Ambient Air Temperature for Storage-25 to 70 Deg C EN/IEC 60947-4-2

We offer Schneider ATS01 Soft Starter Altistart to our clients.

Technical Specifications:
Discrete input logicPositive LI1, LI2, BOOST < 5 V and <= 0.2 mA > 13 V >= 0.5 mA
Maximum switching current2 A 250 V AC inductive cos phi = 0.5 20 ms relay outputs
2 A 30 V DC inductive cos phi = 0.5 20 ms relay outputs
Electrical connection4 mm screw clamp terminal rigid 1 1 to 10 mm² AWG 8 power circuit
Screw connector rigid 1 0.5 to 2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal rigid 2 1 to 6 mm² AWG 10 power circuit
Screw connector rigid 2 0.5 to 1 mm² AWG 17 control circuit
Screw connector flexible with cable end 1 0.5 to 1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal flexible without cable end 1 1.5 to 10 mm² AWG 8 power circuit
Screw connector flexible without cable end 1 0.5 to 2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal flexible with cable end 2 1 to 6 mm² AWG 10 power circuit
4 mm screw clamp terminal flexible without cable end 2 1.5 to 6 mm² AWG 10 power circuit
Screw connector flexible without cable end 2 0.5 to 1.5 mm² AWG 16 control circuit
Electromagnetic compatibilityDamped oscillating waves level 3 IEC 61000-4-12
Electrostatic discharge level 3 IEC 61000-4-2
Immunity to electrical transients level 4 IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3
Voltage/Current impulse level 3 IEC 61000-4-5
Conducted and radiated emissions level B CISPR 11
Conducted and radiated emissions level B IEC 60947-4-2
EMC immunity EN 50082-2
Harmonics IEC 1000-3-2
Harmonics IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6
Micro-cuts and voltage fluctuation IEC 61000-4-11
EMC immunity EN 50082-1
Product certificationsB44.1-96/ASME A17.5 for starter wired to the motor delta terminal
CCC
CSA
C-Tick
GOST
UL
Operating altitude<= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m
Request
Callback


Additional Information:

  • Item Code: ATS01
Yes! I am Interested

Danfoss Pressure Sensors

Danfoss Pressure Sensors
  • Danfoss Pressure Sensors
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandSiemec
Pressure Rangeshigh
Model Name/NumberNA
MaterialMS
Outputhigh
Temperature80+
Usage/ApplicationIndustrial

We are supplying Danfoss make pressure transmitters, pressure switches and other instrumentation and automation products.
Also providing service support 
Request
Callback
Yes! I am Interested

Finder Relays

Finder Relays
  • Finder Relays
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandFINDER

We are supplying all range of FINDER make relays , FINDER Relays are durable and effcient
Request
Callback
Yes! I am Interested

Endress Hauser Flow Meters

Endress Hauser Flow Meters
  • Endress Hauser Flow Meters
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Number
BrandEndress Hauser
Application MediaAny Liquid
Usage/ApplicationAutomotive
MaterialPlastic Body
DisplayDigital

We are supplying Endress huaser make Flow meters , Pressure Transmitters and various process instrumentation products.
Request
Callback
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Products

View All Products




Reach Us
Siva Ganesan (Managing Director)
Frontline Technologies
4/326-H4, Agarwal School Road, Kalappanaickenpalayam
Ganapathy, Coimbatore - 641108, Tamil Nadu, India


Call Us


Send E-mail