Delta, Schneider, ABB, Allen Bradley, Panasonic, FUJI, Mitsubishi, Siemens
Product Details:
Weight | 0.8 to 6.2 Kg |
Phase | Three Phase |
Frequency | 50/60 Hz |
Brand | Mitsubishi |
Voltage | 200 to 230 V |
Permissible Ffrequency Fluctuation | Max +/-5% |
Dynamic Brake | Built-in |
Operation Environment Ambient Temperature | 0-55 Deg C (non-condensing) |
Storage Environment Ambient Temperature | -20-65 Deg C (non-condensing) |
Elevation | Max 1000 m above sea-level |
Vibration | Max 5.9m/s2 (0.6G) |
The MR-J3 generation of servo drives delivers state-of-the-art technology and simple operation in a very compact package. Functions like the advanced vibration suppression system and the further improved real-time autotuning ensure maximum precision, very short positioning times and simple installation. The amplifiers are a full 40% slimmer compared to previous series. The MR-J3 series is available in three versions: The MR-J3-A models are suitable for drive systems with conventional control and are designed for regulating speed, torque and position control tasks. The MR-J3-A servo models are also available with an EtherCAT option. The MR-J3-B models are specified for complex, multi-axis movement sequences and for use in networked automation systems. A servo amplifier with built-in positioning (MR-J3-T) is also available. The units configure themselves by Plug & Play for Mitsubishi Electric's Motion Control and positioning control systems, to which they are connected via the high-speed optical SSCNET III network, which has a cycle period of just 0.44 milliseconds. The MR-J3 is currently available with outputs from 50W to 55kW. Units with higher outputs are being added to the range at regular intervals.
Highlights:
Servo Amplifiers MR-J3-A4/B4/T4 (400 V Type) |
60A4 60B4 60T4 |
100A4 100B4 100T4 |
200A4 200B4 200T4 |
350A4 350B4 350T4 |
500A4 500B4 500T4 |
11KA4 11KB4 |
15KA4 15KB4 |
22KA4 22KB4 |
|
Power supply | Voltage/frequency* | 3-phase 380-480V AC, 50/60Hz | |||||||
Permissible voltage fluctuation | 3-phase 323-528V AC, 50/60Hz | ||||||||
Permissible frequency fluctuation | Max. ±5% | ||||||||
Control system | Sinusoidal PWM control / current control system | ||||||||
Dynamic brake | Built-in | External option | |||||||
Protective functions | Overcurrent shutdown, regeneration overvoltage shutdown, overload shutdown (electronic thermal relay), servo motor overheating protection, encoder fault protection, regeneration fault protection, undervoltage / sudden power outage protection, overspeed protection, excess error protection | ||||||||
Cooling / protection rating | Self-cooling, open (IP00) | Fan cooling, open (IP00) |
Product Details:
Brand | Panasonic |
Voltage | 200 V |
Weight | 8.2 Kg |
Part Number | MDME152GCH |
Momentary Max Peak Torque | 21.5 Nm |
Max Current | 40 (A (o-p)) |
Rated Rotational Speed | 2000 r/min |
Rated Rotational Max Speed | 3000 r/min |
Static Friction Torque | 13.7 Nm |
Enclosure | IP65 |
Flange sq Dimension | 130 mm sq |
Motor Lead Out Configuration | Connector |
Power Supply Capacity | 2.3 kVA |
Rated output Power | 1500 W |
Rated Current | 9.4 A |
Holding Brake | Yes |
Rated Torque | 7.16 Nm |
Our reputation in the market is largely attributable to our precision-designed Panasonic Minas A5 Family Servo Motor from our extensive collection of products. The offered motors are used in different industrial machines. This motor is manufactured using excellent quality raw-material and the latest technology by our skilled professionals. In order to ensure quality, provided motor is stringently tested on various parameters by our experts. Apart from this, remarkable quality and sturdy structure increase the demand of our offered motor in the market.
Features:
About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
Environmental Conditions | For more details, please refer to the instruction manual. |
Details | Middle inertia, Connector type, IP65 |
Family Name | MINAS A5 |
Series | MDME Series |
Type | Middle inertia |
Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4284 |
About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 7.99 |
Recommended moment of inertia ratio of the load and the rotor | 10 times or less |
Rotary encoder: specifications | 20-bit Incremental system |
Rotary encoder: Resolution | 1048576 |
Engaging time (ms) | 100 or less |
Releasing time (ms) | 50 or less |
Exciting current (DC) (A) | 0.79 |
Releasing voltage (DC) (V) | 2 or more |
Exciting voltage (DC) (V) | 24 ± 2.4 |
About brake specifications | This brake will be released when it is energized. Do not use this for braking the motor in motion. Please refer to the details of [Motor Specification Description] , "Specifications of Built-in Holding Brake" and "Notes on [Motor specification] page, Note: 4. |
Product Details:
Brand | Mitsubishi |
Frequency | 50 - 60 Hz |
Phase | Single Phase |
Application | Industrial Automation |
Voltage | 280 V |
Body Material | Mater, Plastic |
Motor Power | Up to 10 HP |
Product Details:
Brand | Panasonic |
Rated Rotational Speed | 2000 rpm |
Max Speed | 3000 rpm |
Rated Torque | 4.77 Nm |
Peak Torque | 14.3 Nm |
Weight Without Brake | 6.7 Kg |
Weight With Brake | 8.1 Kg |
Motor Rated output (kW) | Low inertia | ||||||||||
MSME | |||||||||||
0.05 | 0.1 | 0.2 | 0.4 | 0.75 | 1 | 1.5 | 2 | 3 | 4 | 5 | |
Rated rotational speed (rpm) | 3000 | ||||||||||
Max. speed (rpm) | 6000 | 5000 | 4500 | ||||||||
Rated torque (Nm) | 0.16 | 0.32 | 0.64 | 1.3 | 2.4 | 3.18 | 4.77 | 6.37 | 9.55 | 12.7 | 15.9 |
Peak torque (Nm) | 0.48 | 0.95 | 1.91 | 3.8 | 7.1 | 9.55 | 14.3 | 19.1 | 28.6 | 38.2 | 47.7 |
Weight without brake (kg) | 0.32 | 0.47 | 0.82 | 1.2 | 2.3 | 3.5 | 4.4 | 5.3 | 8.3 | 11 | 14 |
Weight with brake (kg) | 0.53 | 0.86 | 1.3 | 1.7 | 3.1 | 4.5 | 5.4 | 6.3 | 9.4 | 12.6 | 16 |
Product Details:
Brand | Panasonic |
Voltage | 200 V |
Weight | 6.7 Kg |
Part Number | MDME152GCG |
Series | MDME Series |
Enclosure | IP65 |
Flange sq Dimension | 130 mm |
Motor Lead Out Configuration | Connector |
Power Supply Capacity | 2.3 kVA |
Rated output Power | 1500 W |
Rated Current | 9.4 (A (rms)) |
Rated Torque | 7.16 Nm |
Momentary Max Peak Torque | 21.5 Nm |
Max Current | 40 (A (o-p)) |
Rated Rotational Speed | 2000 r/min |
Rated Rotational Max Speed | 3000 r/min |
Rotary Encoder | 20-bit Incremental System |
We offer MDME152GCG Panasonic MINAS A5 Family Servo Motor to our clients.
Technical Specifications:
About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
Environmental Conditions | For more details, please refer to the instruction manual. |
Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4284 |
About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 6.7 |
About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
Product Details:
Brand | Mitsubishi |
Scan Time | 0.065 Micros |
Total Memory Available | 64000 Steps |
Input Type | 24VDC Sink/Source |
Output Type | Relay |
Output Current | 8A |
Number of Inputs | 24 |
Number of Outputs | 24 |
Mounting Type | DIN rail |
Programming Language Used | Ladder Logic |
Maximum Operating Temperature | +50 Deg C |
Minimum Operating Temperature | 0 Deg C |
Program Capacity | 64000 steps |
Depth | 86 mm |
Width | 182 mm |
Expansion Available | Yes |
Supply Voltage | 24VDC |
Programming Interface | Computer, HMI |
Operating Mode | Program, Run |
Power Consumption | 35-40W |
We offer Mitsubishi FX3U-48M Servo Motors to our clients.
Technical Specifications:
Model Number | FX3U-48MR/DS | FX3U-48MR/ES | FX3U-48MT/DSS | FX3U-48MT/DS | FX3U-48MT/ESS | FX3U-48MT/ES |
Stocked Item | S | S | S | S | S | S |
Rating | UL • cUL • CE (EMC) | |||||
Integrated Inputs/Outputs | 48 | 48 | 48 | 48 | 48 | 48 |
Power Supply | 24VDC | 100-240VAC | 24VDC | 24VDC | 100-240VAC | 100-240VAC |
Integrated Inputs | 24 | 24 | 24 | 24 | 24 | 24 |
Integrated Outputs | 24 | 24 | 24 | 24 | 24 | 24 |
Output Type | Relay | Relay | Transistor (Source) | Transistor (Sink) | Transistor (Source) | Transistor (Sink) |
Power Consumption (W) | 35 | 40 | 35 | 40 | 40 | 35 |
Weight (kg) | 0.85 | 0.85 | 0.85 | 0.85 | 0.85 | 0.65 |
Dimensions (W x H x D) mm | 150 x 90 x 86 | 150 x 90 x 86 | 150 x 90 x 86 | 150 x 90 x 86 | 150 x 90 x 86 | 150 x 90 x 86 |
Product Details:
Brand | Panasonic |
Encoder Resolution | 10,000 |
Rated output | 50 to 200 W |
Nominal Torque Max | 0.16 (0.48) Nm |
Rated Rotational Speed | 3,000 (5,000) rpm |
Encoder Pulses Per Revolution | 2,500 p/r |
Degree of Protection | IP65 |
Shaft Length | 25 mm |
Shaft Diameter | 8 h6 mm |
Flange Diameter | 38 mm |
MINAS LIQI series servo drives are ideal for applications that require an affordable technological upgrade to improve reliability and performance. Machines for simple food processing, packaging, printing, metal processing, even small linear robots are but a few example applications for which MINAS LIQI drives are cut out. In combination with Panasonic FP series PLCs, e.g. FP0R and FP-X0, they can be used to realize simple motion solutions. Use our banner freeware PANATERM to configure MINAS LIQI.
Simple:
Product Details:
Brand | Panasonic |
Encoder Resolution | 20 bit incremental |
Part No | MDME102GCH |
Brake | Without Brake |
Frame Size | D (100) |
Rated Torque | 3.18 Nm |
Rated Speed | 3000 rpm |
Input Power Supply | Single phase/3-phase 200V |
Output Power | 1 kW |
Shaft Diameter | 19 mm |
Product Details:
Voltage | 200 VAC |
Speed | 3000 RPM |
Rated Torque | 90.63 / 640 oz-in / mNm |
Brand | Panasonic |
Weight | 2.3 lbs |
Part Number | MHMD022P1U |
Rated Power | 200W |
Encoder Type | Incremental |
Shaft Diameter | 11.60 mm |
Shaft and Bearing Length | 30.00 mm |
Mounting Hole Spacing | 2.756 inch |
Termination Style | Wire Leads |
Torque Max Momentary | 270.48 / 1910 oz-in / mNm |
Operating Temperature | 0 Deg C ~ 40 Deg C |
Product Details:
Brand | Schneider |
Network Number of Phases | Three phase |
Switching Frequency | 8 kHz |
Leakage Current | Less Than 30 mA |
Discrete Output Number | 3 |
Ambient Air Temperature for Operation | 0 to 50 Deg C conforming to UL |
Ambient air Temperature for Storage | -25 to 70 Deg C |
Rated Supply Voltage | 200 to 240 V (- 15 to 10 %) / 380 to 480 V (- 15 to 10 %) |
Supply Voltage Limits | 170 to 264 V / 323 to 528 V |
Supply Frequency | 50/60 Hz (- 5 to 5 %) |
Network Frequency | 47.5 to 63 Hz |
EMC Filter | Integrated |
Continuous Output Current | 3 A (f = 8 kHz) |
Continuous Power | 800 W at 230 V |
Nominal Power | 0.7 kW at 230 V (f = 8 kHz) |
Line current | 2.4 A, THDI of 182 % at 480 V, without line choke 3.5 A, THDI of 88 % at 380 V, with external line choke of 2 mH 2.9 A, THDI of 98 % at 480 V, with external line choke of 2 mH |
Type of cable | Single-strand IEC cable (for θ = 50 °C) conductor material: copper 90 °C ,wire insulation material: XLPE/EPR |
Discrete input logic | Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 |
Response time | <= 5 ms (compliment of STO_A, compliment of STO_B) |
Discrete output type | Logic (DO) 24 V DC |
Discrete output voltage | <= 30 V DC |
Discrete output logic | Positive or negative (DO) conforming to EN/IEC 61131-2 |
Contact bounce time | <= 1 ms (compliment of STO_A, compliment of STO_B) |
Safety function | STO (safe torque off), integrated |
Communication interface | Integrated SERCOS III Integrated Modbus |
Physical interface | 2-wire RS485 multidrop Modbus |
Connector type | RJ45 (labelled CN7) :Modbus |
Transmission rate | 9600, 19200, 38400 bps for bus length of <= 40 m Modbus |
Number of addresses | 1 to 247 Modbus |
Status LED | 1 LED (red) servo drive voltage |
Signalling function | Display of faults in 7 segments |
Relative humidity | Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3 |
Electromagnetic compatibility | Conducted EMC conforming to EN 55011 class A group 1 |
Vibration resistance | 1 gn (f = 13 to 150 Hz) conforming to EN/IEC 60068-2-6 |
Product Details:
Brand | Schneider |
Model No | LXM23DU01M3X |
Nominal Power | 0.1 kW at 220 V |
Leakage Current | Greater Than 3.5 mA |
Tightening Torque | 1.4 N.m (PE (ground)) |
Discrete Input Voltage | 12 to 24 V DC logic |
Absolute Accuracy Error | 0.01 % |
Operating Position | Vertical |
Width | 60 mm |
Height | 162 mm |
Depth | 146 mm |
Product Weight | 1.7 Kg |
Format of The Drive | Book |
IP Degree of Protection | IP20 for on upper part without protective cover / IP41 for on upper part with protective cover |
Network Number of Phases | Single Phase / 3 Phase |
Rated Supply Voltage | 220 V (- 10 to 15 %) single phase / 220 V (- 20 to 15 %) 3 phases |
Supply Voltage Limits | 200 to 255 V single phase / 170 to 255 V 3 phases |
Supply Frequency | 50/60 Hz (- 5 to 5 %) |
Network Frequency Limits | 47.5 to 63 Hz |
Continuous Output Current | 0.9 A |
Continuous Power | 100 W at 220 V |
Electrical connection | Terminal 1.3 mm² / AWG 16 (L1-L2) Terminal 2.1 mm² / AWG 14 (R, S, T) Terminal 0.82 mm² / AWG 18 (U, V, W) Terminal 2.1 mm² / AWG 14 (PA/+, Pbe) |
Analogue input type | Voltage analog input (T_REF) – 10 to 10 V input impedance: 10 kOhm Voltage analog input (V_REF) – 10 to 10 V input impedance: 10 kOhm |
Protection type | Overcurrent for motor Overvoltage for motor Undervoltage for motor Overheating for motor Overload for motor Overspeed for motor Abnormal pulse control command for drive Against reverse polarity for inputs signal Against short-circuits for outputs signal |
Electromagnetic compatibility | EMC immunity with additional EMC filter conforming to EN/IEC 61800-3 environments 1 and 2 EMC immunity (level 3) conforming to EN/IEC 61000-4-2 EMC immunity (level 3) conforming to EN/IEC 61000-4-3 EMC immunity (level 3) conforming to EN/IEC 61000-4-5 EMC immunity (level 4) conforming to EN/IEC 61000-4-4 Conducted and radiated emissions with additional EMC filter conforming to EN/IEC 61800-3 environments 1 and 2 category C2, C3 |
Vibration resistance | 0.075 mm peak to peak (f = 10 to 57 Hz) conforming to IEC 60068-2-6 1 gn (f = 57 to 150 Hz) conforming to IEC 60068-2-6 |
Operating altitude | > 1000 to 2000 m with continuous power derating of 1 % per 100 m <= 1000 m without derating |
Shock resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
Relative humidity | Class 3K3 (5 to 85 %) without condensation or dripping water conforming to IEC 60721-3-3 |
Signalling function | Servo status and fault codes for five 7-segment display units |
Type of cable | Twisted shielded pairs cable (single or double) at 0 to 55 °C |
Product Details:
Output Power | 0.1kw-15kw |
Frequency | 50 Hz |
Efficiency | IE 1 |
Phase | Three Phase |
AC Voltage | 240 V |
Product Details:
Velocity Accuracy | +/-2rpm |
Maximum Acceleration Speed | 80 rpm/ms2 |
Input Frequency | up to 600 kHz |
Maximum Speed | 4000 rpm |
Allowable Low Speed | Reaches1 rpm |
Positioning Accuracy | +/-1 count |
Input | 18 - 80VDC |
Peak Current | 18A |
Continuous Current | 6 A (Max) 50 - 400 W |
Parameters | ACS806 | |||
Min | Typical | Max | Unit | |
Peak output current | 0 | - | 18 | A |
Continue output current | 0 | - | 6 | A |
Supply voltage | +18 | - | +80 | VDC |
Logic signal current | 7 | 10 | 16 | mA |
Pulse input frequency | 0 | - | 600 | kHz |
Isolation resistance | 500 | - | MΩ | |
Current provided to encoder | - | 100 | mA |
Product Details:
Time Rating | Continuous |
Insulation | Class F |
Vibration | 15 mm or less |
Withstand Voltage | 1500VAC |
Insulation Resistance | 10MW minimum at 500VDC |
Enclosure | Totally-enclosed, self-cooled IP67 (except for shaft opening) |
Ambient Temperature | 0 to 40 Deg C |
Ambient Humidity | 20 to 80% (non-condensing) |
Rated Speed | 3000 rpm |
Maximum Speed | 5000 rpm |
Excitation | Permanent magnet |
Drive Method | Direct drive |
Mounting | Flange-mounted |
Painting Color | Muncell notation N1.5 |
The SGMSH Sigma II servo motor is a legacy product and no longer promoted in the Americas. The SGMSH servo motor series had a high torque-to-inertia ratio and incorporated the segmented stator design, which dramatically reduced overall size. These servo motors were well suited for high-cycle-rate applications.
Product Details:
Phase | Single Phase |
Material Type | Plastic, Stainless Steel |
Motor Type | AC |
Voltage | 280 V |
Motor Brand | Panasonic |
Features | Energy Saver, Durable, |
Usage/Application | Industrial |
Frequency | 2kHz |
Panasonic MINAS A5 series servos provide high performance and function for systems where precision, smart control, safety, and easy configuration are needed.
2kHz response frequency:
20-bit encoder; 1.04 million pulses per revolution
Ensures smoother operation by means of manual/automatic notch filters which significantly reduce vibration at machine stoppage. Enables exceptionally fast and accurate positioning. A new proprietary signal processing technology achieves 1.04 million pulses per revolution with a 20-bit encoder.
Low cogging torque:
Achieves the industry's most stable speed and lowest cogging torque by minimizing pulse width. This was made possible by a new design featuring a 10-pole rotor for the motor as well as a magnetic field analysis function. With the reduction in torque variation, the MINAS A5's speed, stability, and positioning behavior have been markedly improved.
4Mpps input/output pulse:
Handles positioning commands via pulse train input - another feature that puts it far ahead of its competitors. Command input and pulse output can both achieve speeds of up to 4Mpps. This enables ultra-fast, high-resolution operation, including the standard full closed control mode.
Real-time auto-gain tuning:
Incorporates the industry's fastest, high-performance real-time auto-gain tuning system, with a simple setup. After installation, tuning is performed automatically upon completion of several operations. When the response frequency has been adjusted, simple tuning results in a change to a single parameter value, and fine-tuning can be carried out by activating the gain adjustment mode in the setup software. The automatic vibration suppression function minimizes equipment damage. Additional mode and stiffness parameters enable easy response frequency optimization for specific machine types such as vertical axis or high-friction, belt-driven machines.
Manual and auto damping filters:
Suppresses the natural vibration frequency component of the command input, which greatly reduces axis vibration at machine stoppage. The number of damping filters has been increased to four from the conventional two; of these four, two are for simultaneous use. The available frequency range has been extended significantly to 1 - 200Hz, and the auto setup has been simplified.
Setup software with motion simulation:
Reads response frequency data from the actual machine into a sample general-purpose application. A simplified simulation function allows you to check gain and filter effects without adjusting the actual equipment.
If you are looking for Panasonic Servo Drivers, please call us .we will do our best to help you find the Panasonic MINAS Servo Drives that you are looking for at the most competitive prices possible.
Product Details:
Brand | Yaskawa |
Vibration Class | V15 |
Insulation Resistance | 500 VDC, 10 MOmega min. |
Ambient Temperature | 0 to 40 Deg C |
Excitation | Permanent magnet |
Mounting | Flange-mounted |
Thermal Class | F |
With Stand Voltage | 1500 VAC for one minute (200-V class) / 1800 VAC for one minute (400-V class) |
Ambient Humidity | 20% to 80% (no condensation) |
Servomotor Model: SGMSV | 10A | 15A | 20A | 25A | 30A | 40A | 50A | 70A | |
Rated Output | kW | 1 | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 7 |
Rated Torque | N∙m | 3.18 | 4.9 | 6.36 | 7.96 | 9.8 | 12.6 | 15.8 | 22.3 |
Instantaneous Peak Torque | N∙m | 9.54 | 14.7 | 19.1 | 23.9 | 29.4 | 37.8 | 47.6 | 54 |
Rated Current | Arms | 5.7 | 9.3 | 12.1 | 13.8 | 17.9 | 25.4 | 27.6 | 38.3 |
Instantaneous Max. Current | Arms | 17 | 28 | 42 | 44.5 | 56 | 77 | 84 | 105 |
Rated Speed | min-1 | 3000 | |||||||
Max. Speed | min-1 | 6000 | 5000 | ||||||
Torque Constant | N∙m/Arms | 0.636 | 0.59 | 0.561 | 0.61 | 0.582 | 0.519 | 0.604 | 0.604 |
Rotor Moment of Inertia | ×10-4 kg∙m2 | 1.74 (1.99) | 2.00 (2.25) | 2.47 (2.72) | 3.19 (3.44) | 7.00 (9.2) | 9.60 (11.8) | 12.3 (14.5) | 12.3 |
Rated Power Rate | kW/s | 58 (51) | 120 (107) | 164 (149) | 199 (184) | 137 (104) | 165 (135) | 203 (172) | 404 |
Product Details:
Brand | Panasoninc |
Weight | 1.5 Kg |
Rated Torque | 1.3 Nm |
Rated Current | 2.5 (A (rms)) |
Rated Rotational Speed | 3000 r/min |
Part Number | MUMA042P1S |
Type | Ultra low inertia |
Enclosure | IP65 |
Voltage | 200 V |
Rated Output | 400 W |
Shaft | Key-way, center tap |
Momentary Max Peak Torque | 3.8 Nm |
Rated rotational Max | 5000 r/min |
Rotary Encoder | 10000 Resolution |
Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P2891 |
Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 0.17 |
About recommended moment of inertia ratio of the load and the rotor | Note) 3. Consult us or a dealer if the load moment of inertia exceeds the specified value. |
About Enclosure | Except rotating portion of output shaft and leadwire end. |
Environmental Conditions | For more details, please refer to the instruction manual. |
Product Details:
Brand | Panasonic |
Rated current | 2.6 (A (rms)) |
Weight | 1.4 Kg |
Oil Seal | Yes |
Rated Torque | 1.3 Nm |
Momentary Max Peak Torque | 3.8 Nm |
Max Current | 11.0 (A (o-p)) |
Rated Rotational Speed | 3000 r/min |
Rated Rotational Max Speed | 5000 r/min |
Rotary Encoder | 20-bit Incremental system |
Part Number | MHMD042G1U |
Series | MHMD Series |
Enclosure | IP65 |
Flange sq Dimension | 60 mm sq |
Motor Encoder Connector | Lead Wire |
Power Supply Capacity | 0.9 kVA |
Voltage | 200 V |
Rated output | 400 W |
We offer MHMD042G1U Panasonic MINAS A5 Family Servo Motor to our clients.
Technical Specifications:
About Enclosure | Except rotating portion of output shaft and leadwire end. |
Environmental Conditions | For more details, please refer to the instruction manual. |
Shaft | Key-way, center tap |
Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4283 |
About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 0.67 |
Product Details:
Voltage | 400 V |
Product Code | 142U3C305BAAEA165240 |
Dimensions | 184 x 142 x 303 mm ( H x W x D ) |
Frame | 142C |
Speed | 3000 rpm |
Shaft Diameter | 24 mm |
Unimotor Range | 1.4 Nm - 136 Nm |
IP Rating | IP65 |
Product Details:
Brand | Delta |
Voltage | 120/240 VAC,160/320 VDC |
Weight | 1.9 Kg |
IP Rating | IP40 |
Rated Torque | 0,44 Nm |
Metric Frame Sizes | 60 and 90 mm |
Rated Speeds | Up to 6,000 rpm |
Peak Torque | 1,66 Nm |
We offer Schneider, Panasonic, ABB, Siemens , Mitsubishi Delta servo drives and servo motors for various applications
Benefits:
Product Details:
Rated Torque | 6.00 Nm |
Base Speed | 1200 r/min |
Gross Weight | 11.35 Kg |
Maximum Peak Current | 9.4 A |
Maximum Speed | 7,000 r/min |
Number of Poles | 8 |
Height | 27.94 cm |
Length | 46.99 cm |
Width | 26.67 cm |
Rated Current | 2.6 A |
Voltage Rating | 300 V |